Active Test

Caution
- Do not perform the active test while driving.
- Active test cannot be started while ICC system warning indicator illuminates.

1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector and start engine.
3. Touch "START", "ICC", and "ACTIVE TEST" on CONSULT-II display in turn.

4. Touch necessary test item.
5. Touch "START".
6. Active test screen will be shown.

ICC BUZZER 1







- Touch "ON" and "OFF" to check that ICC warning chime operates as in the chart.







ICC WARNING LAMP
- Touch "ON" and "OFF" to check that ICC warning lamp operates as in the chart.







METER LAMP
- Start engine.
- Touch "ON" and "OFF" to check that ICC system display operates as in thechart.







STOP LAMP
- Touch "ON" and "OFF" to check that stop lamp operates as in the chart.







BOOSTER SOL/V 3
- Touch any of "MODE 1", "MODE 2", "MODE 3" to check that following operation condition is caused by operating monitor and brake pedal.
- "START" is displayed 10 seconds after operation start. (Active test is completed.)