Active Exhaust System Control Module: Service and Repair

REMOVAL (ACTUATOR)
1. Remove insulator on lower side of actuator.
2. Disconnect harness connector and cable from actuator.
3. Remove actuator.

INSTALLATION
Install in the reverse order of removal.









REMOVAL (MUFFLER CONTROL UNIT)
1. Open trunk lid, and remove trunk side finisher (right).
2. Remove muffler control unit fixing bolt.
3. Disconnect harness connector and remove muffler control unit along with bracket.

CAUTION: Do not drop or damage muffler control unit when removing.

INSTALLATION
Install in the reverse order of removal.