Initial Inspection and Diagnostic Overview
Preliminary CheckBASIC INSPECTION
1. CHECK ALL TIRES PRESSURES
^ Check all tires pressures.
Tire pressure: 230 kPa (2.3 kg/cm2, 33 psi)
OK or NG
OK >> GO TO 2.
NG >> Adjust tire pressure to specified value.
2. CHECK WARNING LAMP ACTIVATION
^ Check warning lamp activation.
^ Does warning lamp activate for 1 second when ignition switch is turned "ON"?
YES or NO
YES >> GO TO 3.
NO >> Check fuse and combination meter. Then repair or replace malfunctioning parts.
3. CHECK CONNECTOR
1. Disconnect tire pressure warning control unit connector M84.
2. Check terminals for damage or loose connection.
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.
4. CHECK TRANSMITTER ACTIVATION TOOL
^ Check transmitter tool battery.
OK or NG
OK >> Carry out self-diagnosis.
NG>> Replace transmitter activation tool battery.