Disassembly and Assembly
For USA/CANADADisassembly:
DISASSEMBLY
1. Turn the plastic cap (low) counterclockwise and unlock it.
2. Turn the xenon bulb socket counterclockwise and unlock it.
3. Unlock the retaining spring and remove the xenon bulb (low).
4. Disconnect the HID control unit connector and remove the HID control unit mounting screws.
5. Turn the halogen bulb socket counterclockwise and unlock it.
6. Remove the halogen bulb from the headlamp.
7. Turn the front turn signal and parking lamp bulb socket counterclockwise and unlock it.
8. Remove the front turn signal and parking lamp bulb from its socket.
ASSEMBLY
Assemble in the reverse order of disassembly, taking care of the following points.
HID control unit mounting screws:
TighteningTorque : 2.5 - 3.8 N.m (0.26 - 0.38 kg-m, 23 - 33 in-lb)
CAUTION:
- When the HID control unit is removed, reinstall it securely and avoid any looseness.
- After installing the bulb, be sure to install the plastic cap and the bulb socket securely to ensure watertightness.