Vehicle Security (Theft Warning) System

CONSULT-II Function

CONSULT-II INSPECTION PROCEDURE




1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch ON.
4. Touch START (NISSAN BASED VHCL).




5. Touch IVMS on the SELECT SYSTEM screen.
If IVMS is not indicated, go to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




6. Check the model specification, touch either WITH SUNROOF or WITH OUT SUNROOF.
7. Touch OK. If the selection is wrong, touch CANCEL.




8. Touch THEFT WARNING SYSTEM on the SELECT TEST ITEM screen.
- WORK SUPPORT, DATA MONITOR and ACTIVE TEST are available for the vehicle security system