Power Door Lock System Self-Diagnosis Procedure

POWER DOOR LOCK SYSTEM SELF-DIAGNOSIS




How To Perform Self-Diagnosis

Description




In this mode, a malfunction code is indicated by the number of flashes from the map lamps and step lamps as shown here:

After indicator lamp turns ON for 2 seconds and then turns OFF, it flashes to indicate a malfunction code. For example, the indicator lamp goes on and off for 0.5 seconds three times. This indicates malfunction code of rear RH door lock actuator/unlock sensor.

Malfunction Code Table:

Malfunction Code Table

Cancel Of Self-Diagnosis
If one of the following condition is satisfied, the communication diagnosis is cancelled.
- Turn ignition switch OFF.
- Ten minutes has passed since the diagnosis result indication start without any diagnosis cancel operation.