Disassembly and Assembly

DOOR MIRROR




Disassembly and Assembly

DISASSEMBLY




1. Place the mirror body with the mirror glass facing upward.
2. Put a strip of protective tape on the mirror body.
3. As shown in the figure, insert a small slotted screwdriver into the recess between the mirror face (mirror holder) and mirror holder bracket, and push up the pawls (2) to remove the mirror holder lower half.

NOTE: When pushing up the pawls, do not attempt to use 1 recess only, be sure to push up with both recesses.

ASSEMBLY




1. Place the mirror holder bracket and mirror body assembly (actuator) in a horizontal position.
2. Fit the upper tab on the mirror face onto the mirror holder bracket first, then press the lower side of the mirror face until a click sound is heard to engage the lower pawls.

NOTE: After installation, visually check that the lower pawls (2) are securely engaged from the bottom of the mirror face.