Flow of Diagnosis
Work Flow1. Check the symptom and customer's requests.
2 Understand the system description.
3. Carry out the preliminary check. Refer to "Preliminary Check".
4. Carry out the communication inspection.
If CONSULT-II is used, refer to "IVMS Communication Diagnosis".
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS".
Is the communication diagnosis result OK?
If OK, GO TO 7.
If NG, GO TO 5.
5. Repair or replace depending on the diagnosis result.
6. Carry out the communication diagnosis again.
If CONSULT-II is used, refer to "IVMS Communication Diagnosis".
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS".
Is communication diagnosis result OK?
If OK, GO TO 7.
If NG, GO TO 5.
7. Perform self-diagnosis.
If CONSULT-II is used, refer to SE-39, "CONSULT-II BASIC OPERATION PROCEDURE". CONSULT-II Basic Operation Procedure
If CONSULT-II is not used, refer to GW-101, "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER". On Board Diagnosis For Automatic Drive Positioner
Is self-diagnosis result OK?
If OK, GO TO 11.
If NG, GO TO 8.
8. Repair or replace depending on the diagnosis result.
9. Carry out the self-diagnosis again.
If CONSULT-II is used, refer to "Operation Procedure".
If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER".
Is self-diagnosis result OK?
If OK, GO TO 11.
If NG, GO TO 8.
10. Referring to Trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart".
11. Does the Reverse Interlock Door Mirror System operate normally?
If it operates normally, GO TO 12.
If not, GO TO 10.
12. Inspection end