Work Support

WORK SUPPORT

Operation Procedure
1. Touch "AUTO LIGHT SYSTEM" on the "SELECT TEST ITEM" screen.
2. Touch "WORK SUPPORT" on the "SELECT DIAG MODE" screen.
3. Touch "AUTO LIGHT SENS ADJ" on the "SELECT WORK ITEM" screen.
4. Touch "START".
5. Touch "NORMAL"."MODE 1 - 3" of which setting is to be changed.
6. Touch "CHANGE SETT".
7. The setting will be changed and "CURRENT SETTING STATUS" will be displayed.
8. Touch "END".

Display Item List
Refer to "SETTING CHANGE FUNCTION FOR AUTO LIGHT SYSTEM".