With Manufacturer's Scan Tool (CONSULT-II)

CONSULT-II BASIC OPERATION




1. With the ignition switch OFF, connect "CONSULT-II and "CONSULT-II CONVERTER to data link connector, and turn the ignition switch ON.




2. Touch "START (NISSAN BASED VHCL).




3. Touch "IVMS.
If "IVMS is not indicated, go to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




4. Check the model specification, and touch either "WITH SUNROOF or "WITHOUT SUNROOF on the "SELECT SYS COND SCREEN".
5. Touch "OK. If the selection is wrong, touch "CANCEL.
6. Select the desired part to be diagnosed on the "SELECT TEST ITEM screen.