Work Support

WORK SUPPORT

Operation Procedure
1. Touch "WIPER on the "SELECT TEST ITEM" screen.
2. Touch "WORK SUPPORT on the "SELECT DIAG MODE" screen.
3. Touch "WIP INT VHCL SPD ADJ" on the "SELECT WORK ITEM" screen.
4. Touch "START".
- Wiper intermittent speed control by vehicle speed can be canceled or resumed.

5. Touch "CURRENT SETTING" for changing "CURRENT SETTING".
- For no changing "CURRENT SETTING", touch "END".




6. Touch "END" after customizing is completed.