CONSULT-II Inspection Procedure For "Multi Remote ENT"

CONSULT-II INSPECTION PROCEDURE FOR "MULTI REMOTE ENT"

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

"MULTI REMOTE ENT"




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.
3. Turn ignition switch "ON".




4. Touch "START(NISSAN BASED VHCL)".




5. Touch "BCM".
If "BCM" is not indicated, go to "Data Link Connector (DLC) Circuit". Diagnostic Aids




6. Touch "MULTI REMOTE ENT".




7. Select diagnosis mode. "WORK SUPPORT", "DATA MONITOR" and "ACTIVE TEST" are available.




Work Support




Horn Chirp Set




Hazard Lamp Back Set




Multi Answer Back Set




Auto Lock Set




Panic Alarm Set




Trunk Open Set




PW Down Set

Part 1:

Part 2:

Data Monitor




Active Test