Scan Tool Testing

DATA MONITOR / Operation Procedure







1. Touch "SIGNAL BUFFER" on "SELECT TEST ITEM" screen.







2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.

Display Item List:

3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on - "DATA MONITOR" screen.
4. Touch "START".
5. When "ELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".