Initial Inspection and Diagnostic Overview

Preliminary Check

BASIC INSPECTION
1. CHECK ALL TIRES PRESSURES
^ Check all tires pressures.
Tire pressure
17 inch tire: 210 kPa (2.1 kg/cm2, 30 psi)
18 inch tire: 240 kPa (2.4 kg/cm2, 35 psi)
OK or NG
OK >> GO TO 2.
NG >> Adjust tire pressure to specified value.

2. CHECK LOW TIRE PRESSURE WARNING LAMP ACTIVATION
1. Check low tire pressure warning lamp activation.
2. Does low tire pressure warning lamp activate for 1 seconds when ignition switch is turned "ON"?
Does warning lamp active?
YES >> GO TO 3.
NO >> Check fuse and combination meter.

3. CHECK CONNECTOR
1. Disconnect BCM harness connectors M1 and M2.
2. Check terminals for damage or loose connection.
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

4. CHECK TRANSMITTER ACTIVATION TOOL
^ Check transmitter activation tool battery.
OK or NG
OK >> Carry out self-diagnosis.
NG >> Replace transmitter activation tool battery.