Removal and Installation

USA/CANADA

REMOVAL




1. Disconnect battery negative cable or remove power fuse.
2. Remove front bumper.




3. Remove headlamp mounting bolts.
4. Pull headlamp toward vehicle front, disconnect connector, and remove headlamp.

CAUTION: When removing headlamps, put a shop cloth or something similar between headlamps and bumper to protect bumper.

INSTALLATION
Install in the reverse order of removal. Be careful of the following:

Headlamp mounting bolt :
Torque: 5.5 Nm (0.56 kg-m, 49 in-lb)

Servicing to Replace Headlamps When Damaged




If only installation part as shown in the figure is damaged, and headlamp
housing itself is not damaged, repair can be completed easily by installing correction brackets.

REMOVAL AND INSTALLATION




1. Remove headlamps.
2. Cut damaged section of installation part, then shape with sandpaper.
3. Attach Inner side bracket to headlamp housing boss with 2 screws.

RH headlamp Inner side 26040 AM800
LH headlamp Inner side 26090 AM800