With Manufacturer's Scan Tool (Infiniti CONSULT-II)

CONSULT-II INSPECTION PROCEDURE







1. With the ignition switch OFF connect CONSULT-II and CONSULT-II CONVERTER to the data link connector then turn the ignition switch ON.







2. Touch "START(NISSAN BASED VHCL)".







3. Touch "BCM" on "SELECT SYSTEM" screen.
If BCM" is not indicated, go to CONSULT-II Checking System, "CONSULT-II Data Link Connector (DLC) Circuit"

ITEMS OF EACH PART:

4. Select item to be diagnosed on "SELECT TEST ITEM" screen.