Draining and Filling Fluid

M/T OIL
DRAINING
1. Start the engine and warm up the transmission unit sufficiently.
2. After stopping engine, remove filler plug and drain plug to drain oil.
3. Replace gasket on drain plug with new one. Screw drain plug into transmission case, and tighten to the specified torque.

CAUTION: Do not reuse gasket.

FILLING
1. Fill new oil into the transmission to the level of the filler plug mounting hole.
Oil grade: API GL-4
Viscosity: Refer to "Fluids and Lubricants".
Oil capacity: Approximately 2.9 ohms (3-1/4 US qt. 2-1/2 Imp qt)
2. Replace gasket on filler plug with new one. Screw filler plug into transmission case, and tighten to the specified torque.

CAUTION: Do not reuse gasket.