System Description

REAR WINDOW DEFOGGER

System Description
The rear window defogger system is controlled by BCM (Body Control Module) and IPDM E/R (Intelligent Power Distribution Module Engine Room). The rear window defogger operates only for approximately 15 minutes.

Power is at all times supplied
- through 20 A fuse [No. 75, and 80, located in the IPDM E/R]
- to rear window defogger relay terminal 3 and 6.
- through 10 A fuse [No. 18, located in the fuse block (J/B)]
- to BCM terminal 42.
- through 50 A fusible link [letter F , located in the fuse block (J/B)]
- to BCM terminal 55.

With the ignition switch turned to ON or START position,
Power is supplied
- through 10 A fuse [No. 1, located in the fuse block (J/B)]
- to BCM terminal 38.
- through 10 A fuse [No. 12, located in the fuse block (J/B)]
- to rear window defogger relay terminal 1, and
- to A/C and audio controller terminal 2.

Ground is supplied
- to BCM terminal 52
- through body grounds M30, and M66.
- to A/C and audio controller terminal 3
- through body grounds M30 and M66.
- to internal CPU of IPDM E/R terminal 38 and 60
- through body grounds E17, and E43.

When A/C and audio controller (rear window defogger switch) is turned to ON,
Ground is supplied
- to BCM terminal 9
- through A/C and audio controller terminal 12
- through A/C and audio controller terminal 3
- through body grounds M30 and M66.

Then BCM recognizes that rear window defogger switch is turned to ON.
Then rear window defogger switch is illuminated.
Then it sends rear window defogger switch signals to IPDM E/R via DATA LINE (CAN-H, CAN-L).
When IPDM receives rear window defogger switch signals,

Ground is supplied
- to rear window defogger relay terminal 2
- through IPDM E/R terminal 52
- through internal CPU of IPDM E/R and IPDM E/R terminal 60
- through body grounds E17 and E43.
and then rear window defogger relay is energized.

When rear window defogger relay is turned ON,
Power is supplied
- through rear window defogger relay terminals 5
- to rear window defogger terminal 2
rear window defogger terminal 1, is grounded through body ground B242.
With power and ground supplied, rear window defogger filaments heat and defog the rear window.

When rear window defogger relay is turned to ON (with mirror defogger models),
Power is supplied
- through rear window defogger relay terminals 5 and 7,
- through fuse block (J/B) terminal 2C,
- through 10 A fuse [No. 8, located in the fuse block (J/B)],
- through fuse block (J/B) terminal 5B.
- to door mirror defogger (Driver side and passenger side) terminal 2.

Door mirror defogger (Driver side and passenger side) terminal 1 is grounded through body grounds M30 and M66.
With power and ground supplied, door mirror defogger filaments heat and defog the mirror.