Vehicle Immobilizer System

CONSULT-II Inspection Procedure




1. Turn ignition switch OFF.
2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.




3. Insert IVIS (NATS) program card into CONSULT-II.
Program card
NATS (AEN02B)

4. Turn ignition switch ON.
5. Touch "START".




6. Select "NATS V.5.0".
If "NATS V.5.0" is not indicated, go to CONSULT-II Checking System CONSULT-II Checking System




7. Perform each diagnostic test mode according to each service procedure.

For further information, see the CONSULT-II Operation Manual, IVIS/NVIS.