Vehicle Security (Theft Warning) System

CONSULT-II Inspection Procedure

"THEFT WAR ALM"




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.




3. Turn ignition switch "ON".
4. Touch "START (NISSAN BASED VHCL)".




5. Touch "SMART ENTRANCE".
If "SMART ENTRANCE" is not indicated, go to CONSULT-II Checking System CONSULT-II Checking System




6. Touch "THEFT WAR ALM".




7. Select diagnosis mode. "DATA MONITOR", "ACTIVE TEST" and "WORK SUPPORT" are available.