Flow of Diagnosis

Work Flow

1. Check the symptom and customer's requests.
2. Understand the system description.
3. Carry out the preliminary check. Refer to "Preliminary Check". Reverse Interlock Door Mirror System
4. Carry out the communication inspection.
If CONSULT-II is used, refer to "IVMS COMMUNICATION INSPECTION". IVMS Communication Inspection
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS". Lamp Flash Communication Diagnosis Procedure
Is the communication diagnosis result OK?
If OK, GO TO 7.
If NG, GO TO 5.

5. Repair or replace depending on the diagnosis result.
6. Carry out the communication diagnosis again.
If CONSULT-II is used, refer to "IVMS COMMUNICATION INSPECTION". IVMS Communication Inspection
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS". Lamp Flash Communication Diagnosis Procedure
Is communication diagnosis result OK?
If OK, GO TO 7.
If NG, GO TO 5.

7. Perform self-diagnosis.
If CONSULT-II is used, refer to "CONSULT-II BASIC OPERATION PROCEDURE". CONSULT-II Basic Operation Procedure
If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER". On Board Diagnosis For Automatic Drive Positioner
Is self-diagnosis result OK?
If OK, GO TO 11.
If NG, GO TO 8.

8. Repair or replace depending on the diagnosis result.
9. Carry out the self-diagnosis again.
If CONSULT-II is used, refer to "CONSULT-II BASIC OPERATION PROCEDURE". CONSULT-II Basic Operation Procedure
If CONSULT-II is not used,refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER". On Board Diagnosis For Automatic Drive Positioner
Is self-diagnosis result OK?
If OK, GO TO 11.
If NG, GO TO 8.

10. Referring to Trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart".
11. Does the Reverse Interlock Door Mirror System operate normally?
If it operates normally, GO TO 12.
If not, GO TO 10.

12. Inspection end