With Manufacturer's Scan Tool (CONSULT-II)

CONSULT-II BASIC OPERATION




1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT- II CONVERTER" to data link connector, and turn the ignition switch ON.




2. Touch "START (NISSAN BASED VHCL)".




3. Touch "IVMS".
If "IVMS" is not indicated, go to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




4. Check the model specification, and touch either "WITH SUNROOF" or "WITHOUT SUNROOF" on the "SELECT SYS COND" SCREEN.
5. Touch "OK". If the selection is wrong, touch "CANCEL".
6. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.