Operation CHARM: Car repair manuals for everyone.

Seats: Description and Operation

POWER SEAT

System Description

POWER WALK-IN SYSTEM
This system is a mechanism on the benefit and convenience inclination when the rear seat gotten on and off.

The seat is made to advance when the seat back of front seat is folded down.

The seat is made to retreat to former position when the seat back of front seat is folded up.

After forward movement has been operated, seat does not move backward when reclining the seat back for more than 26 ° from first locking position.

FORWARD OPERATION
When condition of power walk-in system operating permission is satisfied, the seat advances to the front most at the following condition.
- the seat back is fold down when the door is open
- the door is closed and when the seat is fold down, and then the door is opened.

BACKWARD OPERATION
When condition of power walk-in system operating permission is satisfied, the seat retreats to former position at the following condition.
- Return based on the fold down seat back within 60 seconds after door is opened.

The backward distance of the passenger seat is different according to the seat position of beginning of the power walk-in system.
- Return to former position when the seat position of beginning of the power walk-in system is from the front most position to within 175 mm (6.89 in).
- Return to 175 mm (6.89 in) position when the seat position of beginning of the power walk-in system exceeds 175 mm (6.89 in) from the front most position.

CONDITION OF POWER WALK-IN SYSTEM OPERATING PERMISSION
Common of driver side and passenger side condition
- When seat belt is unfastened
- When vehicle speed is less than 7 km/h (4MPH)
- When does not operates sliding switch

Condition only of driver side
- When shift lever is in P position. (with A/T models)
- When pull the parking brake. (with M/T models)

OPERATION STOP CONDITION OF POWER WALK-IN SYSTEM
Common of driver side and passenger side condition
- When vehicle speed is more than 7 km/h (4 MPH)
- When operates sliding switch
- When the sliding motor locks
- When the operation time is consecutive and 60 seconds or more pass
- When reclining behind the seat back

Condition only of driver side
- When shift lever besides P position. (with A/T models)
- When release the parking brake. (with M/T modes)

Condition only of passenger side
- When seat belt is fastened.