Initial Inspection and Diagnostic Overview

Preliminary Check
BASIC INSPECTION
1. CHECK ALL TIRE PRESSURES
^ Check all tire pressures. Refer to SERVICE DATA AND SPECIFICATIONS (SDS).
OK or NG
OK >> GO TO 2.
NG >> Adjust tire pressure to specified value.

2. CHECK LOW TIRE PRESSURE WARNING LAMP ACTIVATION
1. Check low tire pressure warning lamp activation.
2. Does low tire pressure warning lamp activate for 1 second when ignition switch is turned ON?
Does warning lamp activate?
YES >> GO TO 3.
NO >> Check fuse and combination meter.

3. CHECK CONNECTOR
1. Disconnect BCM harness connectors M1 and M2.
2. Check terminals for damage or loose connection.
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

4. CHECK ACTIVATION TOOL
^ Check activation tool battery.
OK or NG
OK >> Perform self diagnosis.
NG >> Replace activation tool battery.