Ignition Key Hole Illumination
IGNITION KEY HOLE ILLUMINATIONRemoval and Installation
REMOVAL (WITHOUT INTELLIGENT KEY SYSTEM)
Wiring diagram. Refer to "Wiring Diagram -ROOM/L-".
1. Remove cluster lid A and steering lock escutcheon. Refer to "INSTRUMENT PANEL ASSEMBLY" in "IP" section.
2. Pull out ring, turn bulb socket to left to release lock and remove it.
Ignition key hole illumination : 12 V - 1.4 W
REMOVAL (WITH INTELLIGENT KEY SYSTEM)
Wiring diagram. Refer to "Wiring Diagram -ROOM/L-".
1. Remove instrument lower driver panel. Refer to "INSTRUMENT PANEL ASSEMBLY" in "IP" section.
2. Turn bulb socket to left to release lock and remove it.
Ignition key hole illumination : 12 V - 1.4 W
INSTALLATION
Installation is the reverse order of removal.