Operation CHARM: Car repair manuals for everyone.

Radiator Cooling Fan: Service and Repair

COOLING FAN




Image Symbols:





Removal and Installation
REMOVAL
1. Drain engine coolant from radiator.

CAUTION:
^ Perform this step when engine is cold.
^ Do not spill engine coolant on drive belts.

2. Remove air duct (inlet) and air cleaner case.
3. Disconnect radiator hose (upper) at radiator side.





4. Disconnect fan motor harness connectors at the right-lower portion of fan shroud.
5. Remove radiator cooling fan assembly.

CAUTION: Be careful not to damage or scratch on radiator core.

INSTALLATION
Installation is the reverse order of removal.

INSPECTION AFTER INSTALLATION
Make sure that fan motors operate normally

NOTE: Cooling fans are controlled by ECM.

DISASSEMBLY AND ASSEMBLY
Disassembly
1. Remove cooling fans from fan motors.
2. Remove fan motors from fan shroud.

Assembly
Assembly in the reverse order of disassembly.

CAUTION: Cooling fans are different between RH and LH. Be careful not to misassemble them.