Odometer: Description and Operation

ODO/TRIP METER
- VDC/TCS/ABS control unit provides a vehicle speed signal to combination meter with CAN communication.
- Combination meter converts the vehicle speed signal to the 8-pulse signal.
- Combination meter uses the 8-pulse signal to calculate the mileage, and displays it.




How to Change The Display For Odo/trip Meter
Operating the odo/trip meter switch allows switching the mode in the following order.
- Switching odo/trip meter display to the setting of engine speed rpm) (M/T models) and reset of trip can be changed by time while pressing odo/trip switch.
- When resetting with "trip A" displayed, only "trip A" display is reset.

NOTE: The record of the odo meter is kept even if the battery cable is disconnected. The record of the trip meter is erased when the battery cable is disconnected.