Active Test

Active Test
OPERATION PROCEDURE
1. Touch START (NISSAN BASED VHCL) RAS/HICAS ACTIVE TEST.
^ If RAS/HICAS is not displayed, print the SELECT SYSTEM screen.

NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if START (NISSAN BASED VHCL) is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.

2. When turning the steering wheel right or left, the rear wheel turns in the same direction. If the steering wheel is not turned, the rear wheel turns left and right 5 times.