Data Monitor
Data MonitorOPERATION PROCEDURE
1. Touch START (NISSAN BASED VHCL) RAS/HICAS DATA MONITOR.
^ If RAS/HICAS is not displayed, print the SELECT SYSTEM screen.
NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if START (NISSAN BASED VHCL) is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.
2. Return to the monitor item selection screen, and touch any of ALL SIGNALS, SELECTION FROM MENU.
3. Touch START.
4. DATA MONITOR screen is displayed.
DISPLAY ITEM LIST:
DISPLAY ITEM LIST:
