Oil Replacement

Changing M/T Oil
DRAINING
1. Start the engine and warm up the transmission unit sufficiently.
2. After stopping engine, remove filler plug and drain plug to drain oil.
3. Replace gasket on drain plug with new one. Screw drain plug into transmission case, and tighten to the specified torque. Refer to MT-21, "Case Components".

CAUTION: Do not reuse gasket.

FILLING
1. Fill new oil into the transmission to the level of the filler plug mounting hole.

Oil capacity: Approximately 2.9 liters (3 - 1/8 US quarts, 2 - 1/2 Imp quarts)

2. Replace gasket on filler plug with new one. Screw filler plug into transmission case, and tighten to the specified torque. Refer to MT-21, "Case Components".

CAUTION: Do not reuse gasket.