Trunk / Liftgate: Service and Repair

TRUNK LID

TRUNK LID ASSEMBLY

Exploded View DLK-213:

TRUNK LID ASSEMBLY : Exploded View

TRUNK LID ASSEMBLY : Removal and Installation

REMOVAL
1. Remove trunk lid finisher.
2. Disconnect the connectors in the trunk lid, and remove the harness clamps to pull the harness out of the trunk lid.
3. Insert flat-bladed screwdriver into the gap and remove holder.
4. Remove trunk lid stay.

WARNING: Body injury may occur if no supporting rod is holding the trunk lid open when removing the damper stay.

5. Remove the trunk lid hinge mounting bolts on trunk lid side and remove the trunk lid assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installing, apply touch-up paint (the body color) onto the head of the hinge mounting bolts.
- After installing, check operation.
- After installing, perform fitting adjustment. Refer to DLK-215, "TRUNK LID ASSEMBLY : Adjustment". Adjustments