Memory Positioning Module: Service and Repair

Exploded View IP-11 (Part 1):

Exploded View IP-11 (Part 2):

Exploded View

AUTOMATIC DRIVE POSITIONER CONTROL UNIT

Exploded View
Refer to Exploded View IP-11.

Removal and Installation

REMOVAL

CAUTION: When removing and installing, use shop cloths to protect parts from damage.

1. Remove the battery negative terminal.




2. Remove the instrument driver lower panel.
3. Remove the screws (A).
4. Remove automatic drive positioner control unit (1).

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Clamp the harness in position.

NOTE: After installing the driver seat, perform additional service when removing battery negative terminal. Additional Service When Removing Battery Negative Terminal Refer to ADP-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description". Additional Service When Removing Battery Negative Terminal