Backup Lamp: Service and Repair

BACK-UP LAMP

Exploded View EXL-201:

Exploded View

Removal and Installation

CAUTION: Disconnect the battery negative terminal or the fuse.

REMOVAL
1. Remove trunk lid finisher inner.
2. Disconnect back-up lamp connector.
3. Remove back-up lamp mounting nuts. And then remove back-up lamp.

INSTALLATION
Install in the reverse order of removal.

CAUTION: Seal packing cannot be reused.

Replacement

CAUTION: Disconnect the battery negative terminal or the fuse.

BACK-UP LAMP BULB
1. Remove trunk lid finisher inner.
2. Disconnect the back-up lamp connector.




3. Turn the bulb socket (1) counterclockwise and unlock it.
4. Remove the bulb (2) from the socket.