Power Distribution Module: Service and Repair

ON-VEHICLE REPAIR

Exploded View PCS-33:

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation

REMOVAL
1. Disconnect the battery cable from the negative terminal.




2. Remove cowl top cover (RH).
3. Pull up the IPDM E/R assembly while pressing the pawl (A) on the back of the IPDM E/R cover B (1)




4. Remove the IPDM E/R cover A while pressing the pawl (A) at the lower end of the IPDM E/R cover A (1).
5. Disconnect the harness connector and remove IPDM E/R (2).




6. Remove the bolt (A) and remove the bracket (1) from the vehicle.

INSTALLATION
Install in the reverse order of removal.