Headlamp: Service and Repair

ON-VEHICLE REPAIR

FRONT COMBINATION LAMP

Exploded View

REMOVAL

EXL-188 Exploded View:

DISASSEMBLY

Without AFS

EXL-188 Exploded View:

With AFS

EXL-189 Exploded View:

Removal and Installation

REMOVAL

CAUTION: Disconnect the battery negative terminal or the fuse.

1. Remove front bumper fascia.
2. Remove the mounting bolts.




3. Remove the holding clip (A)* and the harness clip (B).
*: Right side only

4. Pull out the headlamp assembly forward the vehicle.
5. Disconnect the connector before removing the headlamp housing assembly.

INSTALLATION
Install in the reverse order of removal.

NOTE: After installation, perform aiming adjustment. Refer to EXL-183, "Description". Headlamp Aiming Adjustment

Replacement

CAUTION:
- Disconnect the battery negative terminal or the fuse.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.

Disassembly and Assembly

DISASSEMBLY
1. Rotate the resin cap counterclockwise and unlock it.
2. Rotate the xenon bulb socket counterclockwise and unlock it.
3. Remove the retaining spring lock. Remove the xenon bulb.
4. Remove the bump bracket.
5. Remove the HID control unit installation screw.
6. Remove the screw. Disconnect the connector from HID control unit.
7. Pull out the xenon bulb socket from the headlamp housing assembly.
8. Rotate the parking lamp bulb socket counterclockwise and unlock it.
9. Remove the bulb from the parking lamp bulb socket.
10. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
11. Remove the bulb from the front turn signal lamp bulb socket.
12. Rotate the side marker lamp bulb socket counterclockwise and unlock it.
13. Remove the bulb from the side marker lamp bulb socket.
14. Rotate the resin cap counterclockwise and unlock it.
15. Disconnect front fog lamp bulb terminals.
16. Remove the retaining spring lock. Remove the bulb.

ASSEMBLY
Assemble in the reverse order of disassembly.

CAUTION:
- Install HID control unit securely.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.