Turn Signal Lamp: Service and Repair

REAR COMBINATION LAMP

Exploded View

REMOVAL

EXL-200 Exploded View:

DISASSEMBLY

EXL-200 Exploded View:

Removal and Installation

CAUTION: Disconnect the battery negative terminal or the fuse.

REMOVAL
1. Remove Trunk rear plate.
2. Remove rear combination lamp mounting nuts.
3. Pull the rear combination lamp toward rear of the vehicle.
4. Disconnect rear combination lamp connector.
5. Remove the rear combination lamp.

INSTALLATION
Install in the reverse order of removal.

CAUTION: Seal packing cannot be reused.