Air Cleaner Housing: Service and Repair

AIR CLEANER AND AIR DUCT

EM-26 Exploded View:

Removal and Installation

REMOVAL
1. Disconnect mass air flow sensor harness connector.
2. Disconnect PCV hose.
3. Remove air cleaner case & mass air flow sensor assembly and air duct & air hose by disconnecting their joints.
^ Add marks as necessary for easier installation.
4. Remove mass air flow sensor from air cleaner case, as necessary

CAUTION:
Handle mass air flow sensor according to the following instructions.
^ Never shock it.
^ Never disassemble it.
^ Never touch its sensor.

INSTALLATION
Note the following, and install in the reverse order of removal.

Inspection

INSPECTION AFTER REMOVAL
Inspect air duct and resonator assembly for crack or tear.
^ If anything is found, replace air duct and resonator assembly.