Work Support (Steering Angle Sensor Adjustment)

WORK SUPPORT (STEERING ANGLE SENSOR ADJUSTMENT)

Work Support Item List






CAUTION: Never use this function but on VDC side.

Notes on Steering Angle Sensor (Neutral Point) Adjustment
- Be sure to adjust steering angle sensor neutral point before driving if any of the following has been removed/installed or replaced: Steering angle sensor; Steering system part, Suspension system part.
- On vehicle with VDC, perform steering angle sensor neutral point adjustment only on VDC side. Never perform the adjustment on ADAPTIVE LIGHT side as this may lead to VDC malfunctions. If the adjustment has been performed on AFS side, readjust on VDC side. For steering angle sensor neutral point adjustment procedures on VDC side, refer to BRC-8, "Adjustment of Steering Angle Sensor Neutral Position" in "ON-VEHICLE SERVICE". Testing and Inspection
- When replaced steering angle sensor, AFS control unit detects "DTC B2515 ST ANG SEN SIG". Delete the malfunction history after adjust steering angle sensor on VDC side.
- Steering angle sensor neutral point adjustment should be performed using CONSULT-III. (The adjustment will not be possible without CONSULT-III.)

Operation Procedure
Refer to BRC-8, "Adjustment of Steering Angle Sensor Neutral Position". Testing and Inspection