Sunroof / Moonroof: Adjustments

SUNROOF


Fitting Adjustment





RID WEATHERSTRIP OVERLAP ADJUSTMENT AND SURFACE MISMATCH ADJUSTMENT
1. Tilt up glass lid then remove side trim.
2. After loosening glass lid from bolts (left and right), tilt down glass lid.
3. Adjust glass lid from outside of vehicle so it resembles "A�A" "B�B" "C�C" as shown in the figure.

a b
A-A 1.4 ± 0.8 mm (0.055 ± 0.031 in) 0 ± 1.5 mm (0 ± 0.059 in)
B-B 1.2 ± 0.8 mm (0.047 ± 0.031 in) 0 ± 1.5 mm (0 ± 0.059 in)
C-C 1.4 ± 0.8 mm (0.055 ± 0.031 in) 0 ± 1.5 mm (0 ± 0.059 in)

4. To prevent glass lid from moving after adjustment, first tighten the bolts of front left, and then tighten the bolts of rear right.
5. Tighten remaining bolts, being careful to prevent glass lid from moving.
6. Tilt glass lid up and down several times to check that it moves smoothly.