Check CAN Communication System

PDU (POWER DISTRIBUTION UNIT)


Check CAN Communication System

1.CHECK SELF-DIAGNOSTIC RESULTS

With CONSULT-III
- Connect CONSULT-III, and turn ignition switch ON.
- Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
- Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
- Check display content in self-diagnostic results.





OK or NG
NO DTC IS DETECTED INSPECTION END
CAN COMM CIRCUIT [U1000] Refer to Trouble Diagnosis Flow Chart.
CONTROL UNIT (CAN) [U1010] Replace Intelligent Key unit.