IPDM E/R (Intelligent Power Distribution Module Engine Room)

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)


Removal and Installation of IPDM E/R

: Vehicle front

REMOVAL
1. Remove cowl top cover (RH). Refer to Locations Service and Repair.





2. Disengage pawls (A) on both side of IPDM E/R cover B (1), remove IPDM E/R cover A (2).
3. While pushing pawl (A) on backside of IPDM E/R cover B (1) toward vehicle front to unlock, lift up IPDM E/R (2).





4. Disengage pawls on both side of IPDM E/R (1), remove IPDM E/R cover B.
5. Remove harness connector from IPDM E/R (1) and remove





IPDM E/R (1).

INSTALLATION
Installation is the reverse order of removal.