Check Power Window Motor (Front Driver Side) Circuit

POWER WINDOW SYSTEM


Check power Window Motor (Front Driver Side) Circuit

1.CHECK POWER WINDOW MAIN SWITCH OUTPUT SIGNAL
1. Turn ignition switch ON.
2. Check voltage between power window main switch connector and ground.










OK or NG
OK - GO TO 2.
NG - Replace power window main switch.
2.CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window main switch and power window motor (front driver side) connector.
3. Check continuity between power window main switch connector and power window motor (front driver side).










OK or NG
OK - Replace power window motor (front driver side).
NG - Repair or replace harness.