Front Wiper Does Not Stop

FRONT WIPER AND WASHER SYSTEM


Front Wiper Does Not Stop

1.CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM
With CONSULT-III
1. Select "FR WIPER INT", "FR WIPER LOW", "FR WIPER HI", and "FR WASHER SW" of BCM data monitor item.
2. With operating the wiper switch, check the monitor status.
Without CONSULT-III
Refer to Component Tests and General Diagnostics.
OK or NG
OK - Replace IPDM E/R. Refer to Service and Repair.
NG - Check combination switch (wiper switch). Refer to Component Tests and General Diagnostics.