Automatic Drive Positioner Control Unit

AUTOMATIC DRIVE POSITIONER CONTROL UNIT


Removal and Installation


REMOVAL

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the battery negative terminal.





2. Remove the instrument driver lower panel. A/T Models, "A/T
M/T Models, "M/ T MODELS : Removal and Installation" (M/T models).
3. Remove the screws (A).
4. Remove automatic drive positioner control unit (1).

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Always clamp the harness to the right place.