High Beam Indicator Lamp Does Not Illuminate

HEADLAMP (FOR USA) - XENON TYPE -


High Beam Indicator Lamp Does Not Illuminate

1.CHECK UNIFIED METER AND A/C AMP.
CONSULT-III SELF-DIAGNOSIS
1. Perform self-diagnosis for "METER A/C AMP" on CONSULT-III.
2. Check if malfunction is indicated.
Is malfunction indicated?
YES - Repair or replace malfunctioning parts.
NO - GO TO 2.
2.CHECK COMBINATION METER INPUT SIGNAL
CONSULT-III DATA MONITOR
1. Select "HI-BEAM IND" of METER A/C AMP data monitor item. 2. With operating the lighting switch, check the monitor status.

When lighting switch is in the HIGH BEAM position : HI-BEAM IND ON

OK or NG
OK - Replace combination meter. Disassembly and Assembly of Combination Meter.
NG - Replace unified meter and A/C amp. Service and Repair.