Intelligent Key System

INTELLIGENT KEY SYSTEM


Trouble Diagnosis Symptom Chart


ALL FUNCTIONS OF INTELLIGENT KEY SYSTEM DOES NOT OPERATE

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- Make sure that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- "ENGINE START BY I-KEY" and "LOCK/UNLOCK BY I-KEY" are ON when setting on CONSULT-III.
- All doors are closed.






DOOR LOCK/UNLOCK FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- Make sure that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- "LOCK/UNLOCK BY I-KEY" is ON when setting on CONSULT-III.
- Intelligent Key is out of key slot.
- All doors are closed.






REMOTE KEYLESS ENTRY FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- Make sure that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- Intelligent Key is out of key slot.
- Ignition switch is not ON position.
- All doors are closed.






TRUNK OPEN FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- Make sure that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- Intelligent Key is out of key slot.
- All doors are closed.






HAZARD AND BUZZER REMINDER FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- "LOCK/UNLOCK BY I-KEY" is ON when setting on CONSULT-III.
- "ANSWER BACK FUNCTION" is ON when setting on CONSULT-III.
- Ignition switch is in OFF position.
- All doors are closed.
- Intelligent Key is out of key slot.






HAZARD AND HORN REMINDER FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- Make sure that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- "ANSWER BACK FUNCTION" is ON when setting on CONSULT-III.
- Ignition switch is in OFF position.
- All doors are closed.






POWER WINDOW DOWN FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.

Conditions of Vehicle (Operating Conditions)
- Ignition switch is in OFF or ACC position.
- Retained power operation does not operate. System Description.






WARNING FUNCTION MALFUNCTION

NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Trouble Diagnosis Procedure.
- Make sure that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.
Conditions of Vehicle (Operating Conditions)
Warning chime functions operating condition is extremely complicated, during operating confirmations, reconfirm the list above twice in order to ensure proper operation.