Check Door Lock Actuator/Driver Side

POWER DOOR LOCK SYSTEM


Check Door Lock Actuator/Driver Side

1.CHECK OUTPUT SIGNAL





Check voltage between BCM connector and ground.





OK or NG
OK - GO TO 2.
NG - Replace BCM.
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM and front door lock actuator driver side connector.





3. Check continuity between BCM connector and front door lock actuator driver side connector.





4. Check continuity between BCM connector and ground.





OK or NG
OK - Replace front door lock actuator (driver side).
NG - Repair or replace harness.