Special Repair Requirement

INSPECTION AND ADJUSTMENT


SYSTEM SETTING : Special Repair Requirement

1. CHECK TYPE OF TRANSMISSION
Check type of transmission for the vehicle.
Witch type of transmission is used for the vehicle?
MT - GO TO 2.
AT - GO TO 4.
2. STEP 1 (FOR MT MODELS)
Turn ignition switch OFF.
- GO TO 3.
3. STEP 2 (FOR MT MODELS)
Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Seat synchronization function is ON: Memory switch indicator blink two times.
- Seat synchronization is OFF: Memory switch indicator blink once.
- END
4. CHOOSE METHOD
There are three way of setting method.
Which method do you choose?
With set switch-GO TO 5.
With CONSULT-III-GO TO 7.
5. WITH SET SWITCH - STEP 1 (FOR AT MODELS)
1. Turn ignition switch OFF.
2. Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Entry/exit assist (seat/steering column) and seat are ON: Memory switch indicator blink two times.
- Entry/exit assist (seat/steering column) and seat are OFF: Memory switch indicator blink once.
- GO TO 6.
6. WITH SET SWITCH - STEP 2 (FOR AT MODELS)
1. Turn ignition switch ACC.
2. Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Seat synchronization are ON: Memory switch indicator blink two times.
- Seat synchronization are OFF: Memory switch indicator blink once.
- END
7. WITH CONSULT-III - STEP 1 (FOR AT MODELS)
Select "Work support".
- GO TO 8.
8. WITH CONSULT-III - STEP 2 (FOR AT MODELS)
1. Select "EXIT SEAT SLIDE SETTING", "EXIT TILT SETTING" or "SEAT SLIDE VOLUME SET" then touch display to change between ON and OFF.
- EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
- EXIT TILT SETTING: Entry/exit assist (steering column)
2. Then touch "OK".
- END