Automatic Drive Positioner

AUTOMATIC DRIVE POSITIONER CONTROL UNIT


Removal and Installation


REMOVAL

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the battery negative terminal.





2. Remove the instrument driver lower panel. Removal and Installation A/T Models, "A/T
MODELS : Removal and Installation".
3. Remove the screws (A).
4. Remove automatic drive positioner control unit (1).

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.

NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Special Repair Requirement.