B2562

B2562 LOW VOLTAGE





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC CONFIRMATION
1. Erase DTC.
2. Turn ignition switch OFF.
3. Perform the "Self Diagnostic Result" of BCM with CONSULT-III, when passed 120 seconds or more after the ignition switch is turned ON.
Is any DTC detected?
YES - SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK POWER SUPPLY CIRCUIT
Check BCM power supply circuit. Power Supply And Ground Circuit.
Is the circuit normal?
YES - Replace BCM. Service and Repair.
NO - Repair the malfunctioning part.